2P2G Enterprises logo 2P2G Enterprises
Measurement & Metrology

2P2G Enterprises · Manor / Austin, Texas

Measurement & metrology services, without the full-time hire.

Quality-lab capability for small and mid-size manufacturers: measurement system studies, dimensional inspection and first article reports, capability evidence, and the data side of PPAP. From someone who ran these programs in-house.

On-site in Central Texas, working with your equipment. Remote delivery anywhere.

Coordinate measuring machine probing a machined part on a granite table in a clean metrology lab
Dimensional inspection on a coordinate measuring machine.
ASQ CQE
Certified Quality Engineer, ASQ (2025)
~20 years
In manufacturing quality, operations, and process optimization
2018–2025
QA Manager at a Central Texas thermal solutions manufacturer
Optical CMM + AS9102
Optical CMM programming and first article inspection, hands-on

Who this is for

Built for shops that need the data, not another headcount

If a customer is asking for evidence your team does not have the hours or the background to produce, that is exactly the gap 2P2G fills.

No QE on staff

Manufacturers without dedicated quality engineering

You have inspectors and good parts, but no one whose job is measurement systems, capability studies, or first article packages.

Customer demands

Suppliers being asked for proof

Your customer wants Gage R&R evidence, Cpk data, or a PPAP package, and the deadline is already on the calendar.

Growing supply chains

Data center, thermal, plastics, and industrial suppliers

Companies feeding fast-growing supply chains in Central Texas and beyond, where documentation has to keep up with production.

Services

Five services, all measurement and data

Every engagement includes full traceability across the elements handled, a walkthrough with your team before anything is submitted, and one revision round if your customer pushes back.

01

Measurement Systems

MSA and Gage R&R studies, measurement method reviews, and inspection program setup. If the measurement cannot be trusted, nothing downstream can. Studies run on your gages, with your operators, the way a valid study has to run.

What you get

  • Gage R&R study, run and reported
  • Measurement method review
  • Inspection program setup
02

Dimensional Inspection & First Article

Dimensional layouts and results packages, first article inspection reports in AS9102 format, and optical CMM measurement support. Performed on-site, on your equipment.

What you get

  • Dimensional layout and results package
  • FAI report in AS9102 format
  • Optical CMM support
03

SPC & Process Capability

Control chart selection and setup, process stability assessment, and capability studies for PPAP submissions and for problem processes. The numbers your customer asks for, computed correctly and explained plainly.

What you get

  • Capability studies: Cp / Cpk / Pp / Ppk
  • Control chart setup
  • Initial process studies
04

PPAP Data Packages

The measurement side of a submission, built new or reviewed before you send it. Rejection rescue included: root-cause the rejection, rebuild the evidence, and resubmit defensibly.

What you get

  • Dimensional results, MSA, capability evidence
  • Material and performance test results
  • Appearance approval reports
  • Written punch list of anything missing
05

Calibration Program Support

Calibration system setup, interval and recall management, and audit-ready records, so a customer or registrar audit does not turn into a scramble.

What you get

  • Calibration system setup
  • Interval and recall management
  • Audit-ready records
Cover of the 2P2G Enterprises services brochure: Proof that your parts are made right, without hiring a full-time quality engineer
Cover, page 1 of 5

Services brochure

The services, in plain English

Our brochure explains all five services in everyday language, with no industry background assumed: what each one is, why a manufacturer needs it, and what you get. Handy for sharing with a colleague or a customer who asked for proof.

Optical vision measuring system inspecting a small metal part on its glass stage, with the measurement profile on a monitor
Optical CMM measurement: the platform behind the first article and dimensional work.
Inspector measuring a machined metal flange with a digital caliper, with engineering drawings and a micrometer on the bench
Dimensional verification against the drawing, at the bench.

How it works

It starts with one email

Describe the part, the study, or the customer requirement. You will get a straight answer on fit, scope, and price before any work begins.

1

Email the problem

Send the drawing, the customer requirement, or the rejection notice to gbenga@2p2g.co.

2

Scope and quote

A short scoping conversation, then a written quote: fixed fee, hourly, or retainer. No work starts without it.

3

The work gets done

On-site in Central Texas using your inspection equipment, or remote on your data, anywhere.

4

Walkthrough and handoff

Results walked through with your team before anything is submitted, with one revision round included.

Per study or package

Fixed fee

Quoted per study or package after scoping. Depends on part complexity and the documentation you already have.

Gap and rescue work

Hourly

For gap assessments, rejected-submission rescue work, and advisory support where the scope is still taking shape.

Ongoing support

Retainer

For ongoing measurement and supplier-quality support: a quality engineer on call, without the full-time cost.

Quoted separately, up front

  • On-site work and travel
  • Rush turnaround
  • Work beyond one revision round
  • Training sessions
Close view of a coordinate measuring machine probe measuring a machined metal part on a granite surface plate
Precision dimensional inspection in a quality lab.

About

Run by the person who did this work in-house

2P2G Enterprises was founded by Gbenga, an ASQ Certified Quality Engineer. Quality engineering has been his focus for the last 8 years, within about 20 years in manufacturing quality, operations, and process optimization.

As Quality Assurance Manager at Noren Thermal Solutions (2018–2025), he owned the site quality program: inspection, metrology, and calibration, under ISO 9001, UL, and CSA, with CAPA and 8D root cause work. A QA Manager stint in plastics manufacturing added heavy PPAP submission volume.

The hands-on background is measurement: Optical CMM programming and near-daily use, AS9102 first article inspection, GD&T, SPC, and MSA / Gage R&R. Data work is done in Python, R, SQL, and Power BI. US-based in Manor, Texas: hands-on work, not offshore paperwork.

  • ASQ Certified Quality Engineer (2025)
  • MBA + BSEE, Electrical Engineering
  • Optical CMM, programmed and run daily
  • AS9102 first article inspection
  • MSA / Gage R&R, SPC, GD&T
  • Python / R / SQL / Power BI

Sectors served

Manufacturers we work with

Data center & thermal hardware supply chain Plastics manufacturing General industrial manufacturing Small and mid-size suppliers, Central Texas and beyond

FAQ

Questions prospects ask first

Do you bring your own measurement equipment?

All measurement work is performed on-site using your inspection equipment, the same way an in-house quality engineer works. That is by design for most services: a Gage R&R study has to run on your gages with your operators to be valid, and SPC and PPAP data work runs on your measurements and your data.

Where do you work?

On-site in Central Texas (Manor / Austin area), and remote delivery anywhere. Data-based work, including capability studies and PPAP data packages, travels well.

What does it cost?

Pricing is quoted per engagement after a short scoping conversation: fixed fee per study or package, hourly for assessments and rescue work, or a retainer for ongoing support. On-site work, travel, and rush turnaround are quoted separately, up front.

Our PPAP was rejected. Can you help?

Yes. Rejection rescue is part of the PPAP data package service: root-cause the rejection, rebuild the measurement evidence, and resubmit defensibly. Email the rejection notice to start.

How do we start?

Email gbenga@2p2g.co with the part, the study, or the customer requirement.

Tell us what your customer is asking for

A drawing, a capability requirement, a Gage R&R request, or a rejection notice. Send what you have and you will get a scoped quote, not a sales pitch.